Indian Railways launches 600 new electric locomotives on major routes
POWER & RENEWABLE ENERGY

Indian Railways launches 600 new electric locomotives on major routes

Preparations are underway for the introduction of high-speed passenger trains on the Delhi-Mumbai and Delhi-Howrah routes, capable of reaching speeds of 160 kmph, along with goods trains operating at 100 kmph using a push-pull system. Indian Railways has initiated the tender process for the procurement and maintenance of 600 new electric locomotives dedicated to both passenger and freight services. The estimated cost of this significant initiative is approximately Rs 150 billion.

The high-powered push-pull locomotives, each with a capacity of 6,000 horsepower, will be produced at the Banaras Locomotive Works (34BLW) in Varanasi. The railways anticipate strong participation from major rolling stock manufacturers in the bidding process, scheduled to commence early next year.

This endeavour is expected to be a substantial boost for BLW, as it plans to manufacture 500 push-pull locomotives for freight services and 100 locomotives for passenger trains. These distributed power push-pull locomotives offer higher acceleration and deceleration, utilising two locomotives at both ends of a train. The push-pull system, controlled by a single command system and operated by one driver and an assistant loco pilot, enhances operational efficiency.

Formerly known as Diesel Locomotive Works (DLW), the Varanasi facility was renamed BLW in 2020 after discontinuing the production of diesel locomotives. The push-pull locomotives are considered advantageous for faster and more efficient train movement, eliminating the need for shunting or reversing during the forward journey. The distributed power push-pull system not only accelerates train speed but also reduces station detention time, thereby improving overall turnaround time.

The fully electrified push-pull locomotives are estimated to cost around Rs 12 crore per locomotive, with the manufacturer at BLW undertaking a 35-year maintenance responsibility. Currently, a non-AC push-pull train with 22 coaches is undergoing trial runs, and another is set to be deployed shortly for active service. Indian Railways plans to deploy these push-pull passenger trains on high-density routes, while the freight locomotives will be utilised for heavy hauling across the country, including Dedicated Freight Corridor (DFC) routes.

Preparations are underway for the introduction of high-speed passenger trains on the Delhi-Mumbai and Delhi-Howrah routes, capable of reaching speeds of 160 kmph, along with goods trains operating at 100 kmph using a push-pull system. Indian Railways has initiated the tender process for the procurement and maintenance of 600 new electric locomotives dedicated to both passenger and freight services. The estimated cost of this significant initiative is approximately Rs 150 billion. The high-powered push-pull locomotives, each with a capacity of 6,000 horsepower, will be produced at the Banaras Locomotive Works (34BLW) in Varanasi. The railways anticipate strong participation from major rolling stock manufacturers in the bidding process, scheduled to commence early next year. This endeavour is expected to be a substantial boost for BLW, as it plans to manufacture 500 push-pull locomotives for freight services and 100 locomotives for passenger trains. These distributed power push-pull locomotives offer higher acceleration and deceleration, utilising two locomotives at both ends of a train. The push-pull system, controlled by a single command system and operated by one driver and an assistant loco pilot, enhances operational efficiency. Formerly known as Diesel Locomotive Works (DLW), the Varanasi facility was renamed BLW in 2020 after discontinuing the production of diesel locomotives. The push-pull locomotives are considered advantageous for faster and more efficient train movement, eliminating the need for shunting or reversing during the forward journey. The distributed power push-pull system not only accelerates train speed but also reduces station detention time, thereby improving overall turnaround time. The fully electrified push-pull locomotives are estimated to cost around Rs 12 crore per locomotive, with the manufacturer at BLW undertaking a 35-year maintenance responsibility. Currently, a non-AC push-pull train with 22 coaches is undergoing trial runs, and another is set to be deployed shortly for active service. Indian Railways plans to deploy these push-pull passenger trains on high-density routes, while the freight locomotives will be utilised for heavy hauling across the country, including Dedicated Freight Corridor (DFC) routes.

Next Story
Infrastructure Energy

REC Transfers HVDC Project to Power Grid

REC Limited has successfully handed over the Special Purpose Vehicle (SPV) for a High-Voltage Direct Current (HVDC) transmission project to Power Grid Corporation of India Limited (PGCIL). This strategic move aligns with the nation's objectives to strengthen its power transmission network. Key Highlights: Project Overview: The HVDC project, under the inter-state transmission system (ISTS) initiative, is a critical component of India's push toward robust and efficient electricity transmission. It aims to handle bulk power transfer across long distances while ensuring minimal losses. Role of RE..

Next Story
Infrastructure Transport

NF Railway Collaborates with IIT Guwahati

The Northeast Frontier (NF) Railway has signed strategic Memorandums of Understanding (MoUs) with IIT Guwahati to foster technological advancements and improve railway operations in the region. This partnership focuses on innovative solutions to enhance safety, efficiency, and sustainability in rail infrastructure. Key Highlights: Purpose of MoUs: The collaboration aims to leverage IIT Guwahati's expertise in technology and research for implementing cutting-edge solutions across railway operations. Key areas of focus include: Automation and digitization in maintenance. Sustainability initiati..

Next Story
Infrastructure Transport

Danapur Division Modernization Plans Revealed

The Railway Board has unveiled ambitious plans for the expansion and modernization of the Danapur Division, a critical hub under the East Central Railway. The initiative focuses on infrastructure development, enhanced passenger amenities, and operational efficiency. Key Highlights: Scope of Modernization: The Railway Board's blueprint emphasizes: Upgrading existing infrastructure to accommodate more passenger and freight traffic. Improving station facilities, such as platforms, waiting areas, and connectivity. Introducing advanced signal systems for safer and smoother operations. Freig..

Hi There!

"Now get regular updates from CW Magazine on WhatsApp!

Join the CW WhatsApp channel for the latest news, industry events, expert insights, and project updates from the construction and infrastructure industry.

Click the link below to join"

+91 81086 03000