Tips for India to build safe buildings
Real Estate

Tips for India to build safe buildings

The lack of regulations for construction and monitoring of buildings makes a huge proportion of structures unsafe. CW records a few suggestions from the industry on changes required to ensure that buildings stand strong, and tall:

Dr Paresh Shah, Professor & Dean, Faculty of Technology, CEPT University: “Authorities responsible for approving the building plan and giving building use permission should have a mechanism to monitor and control the quality of construction. A certified workforce (chartered civil engineers) should be trained specific for this job. Just like charted accountants, all buildings should be certified by such engineers for quality, and a report should be submitted to the authority.”

Dr Niranjan Hiranandani, Founder & Managing Director, Hiranandani Group and President, NAREDCO: “Proper cover to rebars and durable concrete are key parameters of a safe structure. Also, the developer needs to educate the customer that will occupy the structure on good practices for maintenance and to avoid playing with any uncertain interior work, renovation and alterations. Avoiding any overloading of the structure is another aspect that should be considered.”

Dr Pramod Kumar Gupta, Professor, Structural Engineering, Department of Civil Engineering, IIT-Roorkee: “If the site-in-charge (who should be a well-qualified and experienced engineer) follows all the recommendations mentioned in different codes published by BIS during construction, the construction will certainly be defect-free.”

Shabbir Kanchwala, Senior Vice President, K Raheja Corp: “One has to give importance to critical activities such as regular maintenance of buildings; quality audits periodically related to MEP equipment; periodic safety audits; deploying qualified facility management professionals; and installing BMS systems.”

Deepak Suvarna, Chief Projects Officer-Head Projects, Mahindra Lifespaces Developers: “There must be a mechanism to apply checks and balances during design and construction. The current system relies mainly on government approvals and does not mandate stage-wise checking. Organisations should follow a maker-checker system to avoid site defects. Independent quality departments can undertake detailed, impartial supervision at project sites. One important parameter for building safety is the contractual inclusion of checking by the structural consultant at all stages of development. This increases accountability during the design and structural inspection stages.”

Rohit Poddar, Managing Director, Poddar Housing and Development, and Joint Secretary, NARDECO Maharashtra: “Superior structural strength can be attained by using a good-quality shuttering method followed by good-quality RMC with curing compound and the correct procedure to cure concrete. This whole procedure should be followed for each pour and slab. It is important to have a lab to check the quality of the RMC. An external architect should check the quality of each slab on a regular basis along with an external Q&M firm that reports directly to the board.”

Samyak Jain, Director, Siddha Group: “Assigning quality and well-qualified professionals, quality audits related to MEP equipment, safety audits and checking fire-performance requirements will help ensure a safe structure. Also, regular maintenance of the building and installation of BMS to control and monitor its mechanical and electrical equipment, such as ventilation, lighting and power, fire and security systems, will help avoid any future issues with the building.”

SHRIYAL SETHUMADHAVAN

The lack of regulations for construction and monitoring of buildings makes a huge proportion of structures unsafe. CW records a few suggestions from the industry on changes required to ensure that buildings stand strong, and tall: Dr Paresh Shah, Professor & Dean, Faculty of Technology, CEPT University: “Authorities responsible for approving the building plan and giving building use permission should have a mechanism to monitor and control the quality of construction. A certified workforce (chartered civil engineers) should be trained specific for this job. Just like charted accountants, all buildings should be certified by such engineers for quality, and a report should be submitted to the authority.” Dr Niranjan Hiranandani, Founder & Managing Director, Hiranandani Group and President, NAREDCO: “Proper cover to rebars and durable concrete are key parameters of a safe structure. Also, the developer needs to educate the customer that will occupy the structure on good practices for maintenance and to avoid playing with any uncertain interior work, renovation and alterations. Avoiding any overloading of the structure is another aspect that should be considered.” Dr Pramod Kumar Gupta, Professor, Structural Engineering, Department of Civil Engineering, IIT-Roorkee: “If the site-in-charge (who should be a well-qualified and experienced engineer) follows all the recommendations mentioned in different codes published by BIS during construction, the construction will certainly be defect-free.” Shabbir Kanchwala, Senior Vice President, K Raheja Corp: “One has to give importance to critical activities such as regular maintenance of buildings; quality audits periodically related to MEP equipment; periodic safety audits; deploying qualified facility management professionals; and installing BMS systems.” Deepak Suvarna, Chief Projects Officer-Head Projects, Mahindra Lifespaces Developers: “There must be a mechanism to apply checks and balances during design and construction. The current system relies mainly on government approvals and does not mandate stage-wise checking. Organisations should follow a maker-checker system to avoid site defects. Independent quality departments can undertake detailed, impartial supervision at project sites. One important parameter for building safety is the contractual inclusion of checking by the structural consultant at all stages of development. This increases accountability during the design and structural inspection stages.” Rohit Poddar, Managing Director, Poddar Housing and Development, and Joint Secretary, NARDECO Maharashtra: “Superior structural strength can be attained by using a good-quality shuttering method followed by good-quality RMC with curing compound and the correct procedure to cure concrete. This whole procedure should be followed for each pour and slab. It is important to have a lab to check the quality of the RMC. An external architect should check the quality of each slab on a regular basis along with an external Q&M firm that reports directly to the board.” Samyak Jain, Director, Siddha Group: “Assigning quality and well-qualified professionals, quality audits related to MEP equipment, safety audits and checking fire-performance requirements will help ensure a safe structure. Also, regular maintenance of the building and installation of BMS to control and monitor its mechanical and electrical equipment, such as ventilation, lighting and power, fire and security systems, will help avoid any future issues with the building.” SHRIYAL SETHUMADHAVAN

Next Story
Infrastructure Energy

Centre suggests states to list power firms

Power Minister Manohar Lal urged states and union territories to consider listing their power generation, transmission, and distribution companies on stock exchanges to attract investment and improve operational efficiency. Addressing the media, after a conference of power ministers, Lal highlighted the need for increased capital inflows to meet India’s rising power demand, which has placed added strain on the sector. “With the growing power demand, there is a growing need for investment in the sector and improving operational efficiencies. States may identify and take up utilities for lis..

Next Story
Infrastructure Transport

Metro on backburner as Tricity set to get new e-buses circuit

To boost connectivity for the commuters of the Tricity, a new circuit-cum-network of electric buses (e-buses) is all set to come up that will cover Chandigarh, Panchkula, and Mohali. The move comes days after Union Minister for Housing and Urban Affairs Manohar Lal Khattar said that in Chandigarh the ridership is not according to the criteria set for operating a Metro. He had also said that the option of a pod taxi can also be explored as it will not impact the heritage of the Union Territory (UT).Officials stated that the e-buses decision intends to provide an eco-friendly public transportati..

Next Story
Infrastructure Energy

Rajasthan government plans to develop hi-tech city near Jaipur

On the lines of Gujarat International Finance Tech (GIFT) City and Hyderabad Information Technology and Engineering Consultancy (HITEC) City, Raj govt is gearing up to develop a "hi-tech city" close to Jaipur. Recently, Boston Consulting Group – a multinational consulting firm – gave a presentation on the concept of hi-tech cities, follwing which the state govt has started looking for suitable land on outskirts of Jaipur. "We are going to construct a hi-tech city on the outskirts of Jaipur. We are trying to ascertain the amount of land required for core areas of the city and for areas wh..

Hi There!

"Now get regular updates from CW Magazine on WhatsApp!

Join the CW WhatsApp channel for the latest news, industry events, expert insights, and project updates from the construction and infrastructure industry.

Click the link below to join"

+91 81086 03000